AGB | Impressum
AJA HI5-3D
HD-SDI Multiplexer To HDMI 1.4a and SDI Video and Audio Converter

Produktbeschreibung

The Hi5 converts SD or HD-SDI to HDMI for driving HDMI monitors. Embedded audio is supported in the HDMI output allowing a convenient single cable audio/video connection. The Hi5 provides 2-Channel RCA style audio outputs for separate audio monitoring if needed. The Hi5 also provides a looping SD/HD-SDI output useful for connecting additional equipment, or for 'daisy chaining' multiple monitors to the same source.

The Hi5-3D supports, depending on the video format, 'side-by-side', 'top-bottom', and 'frame- packing' 3D modes. The 'side-by-side' and 'top-bottom' modes involve compressing, either horizontally or vertically, each input for combining into a single video stream at the same rate of the inputs. The 'frame-packing' mode stacks two full resolution inputs into a 'tall' frame (at twice the clock and line rates). When selected, 'frame- packing' can only be used with 23.98/24Hz input frame rates.

Each input, in addition to 3D processing, can be flipped either horizontally, vertically, or both. This control is provided by 4 switches that can be engaged in any combination.

The Hi5-3D works with both 2D and 3D inputs. When in the 2D mode, the input is simply passed to the output unmodified. In the 3D mode, the Hi5-3D supports the minimum required 3D modes as defined by the CEA for HDMI 1.4a televisions.

CEA Required 3D modes:

2xSDI 1.5gb 720p50/59.94/60 T/B
2xSDI 1.5gb 1080p23.98/24 T/B, FP
2xSDI 1.5gb 1080psf23.98/24 T/B, FP
2xSDI 1.5gb 1080i50/59.94 S/S

Notes:
'psf' inputs are converted to 'p' for HDMI output. The SDI output can support S/S and T/B formats only. Future software versions may add other formats.

The Hi5-3D supports both dipswitch control and host control via the MiniConfig application. One of the dipswitches is a 'Local/Remote' switch. When in the 'Local' mode, the remaining dipswitches support a subset of the user controls. When in the 'Remote' mode, AJA's MiniConfig application controls the unit. The last configuration is held in memory on the Hi5-3D for use when disconnected.

Besonderheiten

  • HD-SDI to HDMI 1.4a with additional SDI output
  • 10-bit HDMI 1.4a support including 3D and embedded audio
  • Additional 2-Channel RCA jack audio output
  • Setup via Dipswitch or PC/Mac using USB port and supplied USB cable (USB configuration software application supplied on CD)
  • Uses 5-20V power supply (included with purchase)
  • 5 year warranty
  • Converter Brochure

mediasystems GmbH
Hubelmatt 17
3624 Goldiwil
Schweiz
info@mediasystems.ch
AGB
Impressum
© mediasystems GmbH 2011